Gas Liner

New Vent Solutions' chimney liners can be used with solid fuel and gas appliances. The corrugated outer and twin skin construction make this chimney liner a high quality product. New Vent Solutions' chimney liners are suitable for heavy use or occasional stove use.

Our chimney liners benefit from a triple lock joint system, joining together the outer and inner layers and providing excellent strength and stability. The joints overlap thus offering protection from condensation. This chimney liner can withstand temperatures up to 750 degrees celsius.

Our gas liners and clamp plates are available in the following sizes: 100mm, 125mm, 155mm, 180mm and 200mm.

Click on the images below to view more on our gas liner supplies for chimneys.


Gas liner

Gas Liner

Clamp Plate

Clamp Plate




Chimney Liner Installation

Make sure the chimney has been swept properly to remove tar and soot deposits. At this point, you can check for any damage on the chimney, making sure it is structurally safe and sound. You may need to remove a chimney pot or other obstructions before installing the chimney liner. Determine the correct size of chimney liner you require. You could also think about chimney liner insulation, a useful addition when the chimney stack is external or particularly high. Looking at the chimney liner, make sure you notice the arrows pointing up. The chimney liner should be installed with the arrows pointing up the chimney. Use a draw rope to attach a nose cone to the bottom of the chimney liner. Optionally, fix a chimney liner installation jacket to the last section. Drop the draw rope down the flue and get an assistant to locate the rope at the bottom of the chimney and guide the chimney liner downwards.

When the chimney liner is pulled all the way through the flue, connect the base to the appropriate adaptor. The top end of the chimney liner can be attached using a suspending cowl, with the cowl then attached to the chimney pot. Alternatively, insert the end of the liner into a top sleeve, use a plate and clamp to fix the top of the chimney liner, use a suitable mortar or fit a chimney pot. A chimney cowl can then be attached to the chimney pot. View more information on chimney liner installation here.

New Vent Solutions, based in the west of Glasgow, offers a massive range of chimney liners, chimney systems, stove pipes, single wall (single skin) stainless steel flues, twin wall pipes, chimney cowls, flashings and accessories. Stockist of Isokern products. Stockist of Selkirk IL Flue (Insta Lock) products and Dektite flashings. If you need to chat, please call us on 01389 892301. We're the number 1 stockist, the Glasgow Chimney Liner and supplies professionals!