NVS Limited

Single Wall (Single Skin) Stainless Steel Flue

Here's what Schiedel have to say about the Prima Plus and Prima Plus 1mm stainless steel single wall (single skin) wall flue system:

Single Wall (Single Skin) Stainless Steel Flue

"Prima Plus is a high quality 316L stainless steel single wall flue system with a wall thickness of 0.6mm. It is designed for use on gas and oil burning stoves and boilers with continuous operating temperatures up to 450°C and short firing up to 600°C. With the addition of a gasket to the joint, Prima Plus is designed for fluing condensing gas and oil appliances with positive pressures up to 200Pa, continuous operating temperatures up to 160°C and short firing up to 200°C.

It can also be used for lining brick stacks for gas, oil, multi-fuel appliances and open fires as an alternative to flexible liner. (The exception is in England where Building Regulations now disallow the use of 0.6mm as a liner in domestic installations).

Prima Plus 1mm can be used for the same applications as Prima Plus. Additionally it is specifically designed for connecting solid fuel appliances to existing brick stacks or a twin wall chimney. It provides internal fluing of domestic woodburning, coal and multi-fuel stoves and boilers with normal operating temperatures up to 540°C and short firing up to 760°C".

Prima Plus

  • Advanced corrosion-resistant design and construction using 0.6mm 316L continuously-welded stainless steel. The only stainless steel system to have passed the internationally recognised GASTEC corrosion test.
  • Engineered-tolerance joint simply push-fits together giving exceptional load bearing capacity. Optionally, a locking band can be fitted for extra joint security.
  • Inward bead on the male joint spigot acts as a capillary break preventing moisture being drawn through the joint.
  • Adjustable 0-90° elbows quickly solve alignment problems on installation of flue runs.
  • Can be painted if required.
  • For condensing appliances a gasket is fitted to the inward bead of the male joint.

Prima Plus 1mm

  • Identical construction and features to Prima Plus but made from 1.0mm 316L stainless steel.
  • Use as an alternative to vitreous enamelled flue pipe, painted if required.

Prima Plus Connecting Flue Pipe is CE Certified to EN 1856-2 TUV 0036 CPD 9195 017 with designations T600 N1 W V2 L50060 G(400), T200 H1 W V2 L50060 O(200), T200 P1 W V2 L50060 O(200) and T200 N1 W V2 L50060 O(200). Single Wall System Chimney according to EN 1856-1 TUV 0036 CPD 9195 018, T600 N1 W V2 L50060 G(70). Chimney Liner according to EN 1856-2 TUV 0036 CPD 9195 019,T600 N1 W V2 L50060 G and T200 P1 W V2 L50060 O. The Prima range is manufactured under the strict requirements of BS EN ISO 9001:2000 Quality management scheme. Prima Plus has corrosion certification from Gastec, MPA and TUV. Prima Plus 1mm is listed by HETAS as a chimney suitable for solid fuel.

You can view more information on this range of single wall (single skin) stainless steel flue by following the links below:

Return to previous page